H5.5X9REC25_RPW

H5.5X9REC25_RPW316 Heavy Wall liners are designed for all fuel applications, and are manufactured with . 015 thick Stainless Steel

Designed to support a vertical wall install above the tee or offset or as an intermediate support

allowing the creosote to be removed by conventional or rotary cleaning

Pair Short Body Pellet Tee with Short Tee End Caps

The Ventubes do this by allowing up to 85% of the condensation inside of the cavity to escape

They can also be insalled in any residential fireplace with a width of 30 inches to 41 inches

It gives users more control and makes applying the correct amount of material for various smoke chambers easier

316 liners are designed for all fuel applications

Use the 5164 Dryer Vent Rod with the 3 inch or 4 inch propeller brushes for pellet with drill adapter

Coverage is approximately 4-6 square feet per gallon at 1/8 inch to 1/4 inch thickness

Starting with (Figure 1) is a section of Saf-T Liner

So remember to FULLY EXPAND your liner to it’s exact length before installing

and to reduce turbulance in the smoke chamber by reducing the effects of corbelled bricks